IP Technology Distribution
972.831.1600

Patton SmartNodes: Policy Routing feature

Patton SmartNodes: Beyond Gateways, Powerful IP Routing Engine

Patton SmartNodes are not just gateways. The SmartNode includes a very powerful IP routing engine that includes features usually only found in much more expensive networking devices.

This post introduces the Policy Routing feature in some detail to underline the statement above.

A typical IP CPE router includes an IP routing table which can be populated with:

  • A default route
  • Static routes
  • Automatically learned routes from DHCP, ICMP and maybe some routing protocols (RIP, OSPF)

A Patton router goes beyond this. It allows you to configure multiple routing tables and to chose very specifically which traffic uses which routing table.

In this way it is possible to:

  • Setup multiple virtual routers in one device
  • Separate multiple IP networks routed through the same device
  • Control in detail how different applications and traffic streams are handled on the network

Typical applications for this functionality include

  • Separation of user-traffic and network-management-traffic
  • Separation of voice and data networks and traffic
  • Combination of VPN traffic routing and public internet traffic routing on one device

The configuration setup for this functionality is clearly structured and highly flexible.

Start by creating multiple routing tables.

Example:

routing-table PUBLIC

route 0.0.0.0/0 gateway 192.168.100.2 metric 0

 

routing-table MGMT

route 0.0.0.0/0 gateway 192.168.200.2 metric 0

 

Now assign incoming IP traffic to one of the tables. This can be done with three different levels of detail depending on your requirements:

  • Simple and generic: Assign all traffic coming in on a given IP Interface to a routing table

Example:

local

route 1 dest-table MGMT

 

interface LAN

ipaddress LAN 10.10.10.1/24

route 1 dest-table PUBLIC

 

  • More specific: Assign traffic to routing tables based on rules

Example:

local

route 1 protocol udp src-port 5060 dest-table VOICE

route 2 protocol tcp src-port 5060 dest-table VOICE

route 3 protocol udp src-port 4864..5375 dest-table VOICE

route 4 protocol tcp src-port 80 dest-table MGMT

route 5 protocol tcp src-port 23 dest-table MGMT

 

interface LAN

ipaddress LAN 10.10.10.1/24

route 1 protocol udp src-port 5060 dest-table VOICE

route 2 protocol tcp src-port 5060 dest-table VOICE

route 3 protocol udp src-port 4000..4099 dest-table VOICE

route 4 dest-table PUBLIC

 

  • Very detailed: Assign traffic to routing tables based on traffic classes. This third option makes use of the powerful traffic classifier profiles which are also used for traffic management and quality of service functionalities.

Example:

profile classifier CL_MGMT

match 1 protocol tcp src-port 80 set traffic-class TC_MGMT

match 2 protocol tcp src-port 23 set traffic-class TC_MGMT

 

profile classifier CL_SIP_SIG

match 1 protocol udp src-port 5060 set traffic-class TC_SIP_SIG

match 2 protocol tcp src-port 5060 set traffic-class TC_SIP_SIG

 

context ip ROUTER

local

use profile classifier out 1 CL_SIP_SIG

use profile classifier out 2 CL_MGMT

route 1 traffic-class local-voice dest-table VOICE

route 2 traffic-class TC_SIP_SIG dest-table VOICE

route 3 traffic-class TC_MGMT dest-table MGMT

 

interface LAN

ipaddress LAN 10.10.10.1/24

use profile classifier in 1 CL_SIP_SIG

route 1 traffic-class TC_SIP_SIG dest-table VOICE

route 2 protocol udp src-port 4000..4099 dest-table VOICE

route 3 dest-table PUBLIC

 

The following figure provides an overview of the configuration elements used in this functionality:

Patton SmartNode Policy Routing feature

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For more detail please refer to the current version of the Trinity Command Line Reference Guide. We hope this small feature introduction provides you with a little insight into the power of Patton Products and helps you solve specific network problems you may encounter in your daily work. If you're interested in purchasing a Patton SmartNode, call your ABP rep at 972.831.1600 or find it online in our PartnerStore.

 

Originally published by Patton's Ramon Felder on https://blog.patton.com/index.php/2017/08/02/policy-routing-on-smartnodes/

Share Now Share on Facebook Share on LinkedIn Share on Twitter Share on google+